manualshive.com logo in svg

Panasonic KX-NSX1000, Manual

Share
Download
Panasonic KX-NSX1000 Manual Download Page 291

3.2.2.3  Automatic Login

Description

Allows subscribers and managers to log in to their mailbox directly without entering the mailbox number. A
subscriber/manager can log in to his or her mailbox directly by:

•

dialling a Unified Messaging extension number directly from his or her extension.

•

calling the Unified Messaging system from a telephone number that is assigned to log him or her into the
mailbox.

•

dialling (from an outside telephone) the DID number assigned to log him or her into the mailbox.

•

calling the Unified Messaging system so that the call is received on the trunk group assigned to log him or
her into the mailbox.

It is also possible for subscribers and managers to log in to their mailboxes without entering a password.

Notice

When disabling the password requirement, ensure that an unauthorised third-party is not allowed access
to your extension.

Conditions

•

Access from outside telephones will be enabled automatically after a Caller ID number, DID number, or
trunk group number is assigned. A trunk group number or DID number can be assigned by the System
Administrator only.

•

When this feature is activated, "Toll Saver" is also available.

PC Programming Manual References

20.1.1 UM Configuration—[1-2] Mailbox Settings—Basic Setting—Remote Call/Automatic Login/Direct
Service

→ Auto Login Extension
→ Auto Login Extension Password Entry Requirement
→ Auto Login Caller ID 1, 2
→ Auto Login Caller ID Password Entry Requirement
→ Auto Login DDI/DID
→ Auto Login TRG No.
→ Auto Login DDI/DID, TRG No. Password Entry Requirement
→ Auto Login Toll Saver

Feature Manual References

3.2.2.33 Toll Saver

Operating Manual References

Subscriber Operation

1.8.6 Other Features—Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver

3.2.2.4  Autoplay New Message

Description

It is possible to play new messages automatically when a subscriber or the System Manager/Message
Manager logs into his or her mailbox. There is no need to press [1] to receive the new messages.

3.2.2 Subscriber Features

Feature Manual

291

Summary of Contents for KX-NSX1000









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands