manualshive.com logo in svg

Panasonic KX-NSX1000, Manual

Share
Download
Panasonic KX-NSX1000 Manual Download Page 184

Operating Manual References

1.11.2 If an External Relay is Connected

2.18.5  Communication IP Camera/Video Door Phone

Description

KX-NTV100 series SIP extensions (e.g., KX-NTV150, KX-NTV160) can be registered to the NSX server as
a Communication IP Camera or Video Door Phone. KX-NTV100 series are SIP extensions with a call button
and a camera, and they can make and receive calls in the same way as other SIP extensions. When the call
button is pressed, the dial sequence set in the Communication IP Camera or Video Door Phone will be sent
to the NSX server, which will then call the appropriate extension.
 

KX-NTV100 series SIP extensions have the following features:

•

KX-NTV150 and KX-NTV160 have the Doorphone Call feature. However, they cannot be linked to legacy
doorphones. (→ 2.18.1 Doorphone Call)

•

KX-NTV160 has the Door Open feature. However, it cannot be linked to legacy doorphones. (→
2.18.1 Doorphone Call)

•

Upgrading the firmware for KX-NTV series SIP extensions is performed thorough the device. For details,
refer the manual for the device.

Conditions

[General]

•

KX-NTV150 and KX-NTV160 require a Panasonic device activation key (KX-NSXN001/KX-NSXN010).

•

KX-NTV150 and KX-NTV160 require a V-SIPEXT card.

•

The maximum number of KX-NTV150 and KX-NTV160 that can be registered is 128.

•

KX-NTV150 and KX-NTV160 are registered as an optional IP device rather than a user device.
Optional IP devices are not assigned to a user container, but to an optional IP device container.

•

KX-NTV150 and KX-NTV160 are counted as SIP extensions. The total number of SIP extensions,
including KX-NTV150 and KX-NTV160, cannot exceed the maximum number of SIP extensions.

•

The dial sequence assigned to the call button of KX-NTV150 and KX-NTV160 can include feature
numbers, outside line access numbers, etc. NSX server does not restrict the dial sequence.

[Camera Control]

•

KX-NTV150 and KX-NTV160 support camera control using Outband DTMF signals while talking or
monitoring video. This feature enables users to control the camera using their extension's key pad.

•

Camera control is available from the following devices:

–

KX-NT500 series IP-PTs

–

KX-HDV series SIP phones

–

Third party SIP phones that comply with RFC8233
For devices connected to NSX server, this feature is only available for the recommended third party
SIP phones which have a video monitoring feature.

•

To use the camera control feature, the connection between KX-NTV150 or KX-NTV160 and the device
must use a peer-to-peer (P2P) connection.
Therefore, KX-NTV150 or KX-NTV160 and the devices controlling its camera must belong to the same
P2P group.

2.18.5 Communication IP Camera/Video Door Phone

184

Feature Manual

Summary of Contents for KX-NSX1000









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands