Panasonic KX-NSX1000, Manual

Page: 214 / 456

Conditions
•
To be able to use this feature, through system programming, it is required to enable this feature and
register the IP address of the Syslog server.
PC Programming Manual References
7.3.2 Utility—Log—Syslog
28.3.2 Network Service—[3-2] Client Feature—Syslog
Feature Manual References
5.6.3 Local Alarm Information
2.22.2 Printing Message
Description
An extension user can select a message to be output on SMDR. Up to eight messages can be
preprogrammed in the Printing Message table, and are available to all extensions connected to the PBX. A
message can contain the "%" symbol, which requires a number to be entered in its place when the message
is selected at an extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of
information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign
in by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A
connected PC can then be used to generate employee work records.
Conditions
•
Up to seven "%"s can be stored for each message.
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—Printing Message
14.2 PBX Configuration—[6-2] Feature—Hotel & Charge—Main—SMDR for External Hotel Application 2—
Printing Message 1–8
Feature Manual References
2.22.1.1 Station Message Detail Recording (SMDR)
6.1 Capacity of System Resources
Operating Manual References
1.12.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)
2.22.3 Call Charge Services
Description
The PBX receives a call charge signal during or after a conversation with an outside party. The call charge
information is shown on the telephone display and SMDR.
1. Call Charge Signal Services
2.22.2 Printing Message
214 Feature Manual