manualshive.com logo in svg

Panasonic KX-NSX1000, Manual

Share
Download
Panasonic KX-NSX1000 Manual Download Page 322

•

The feature requires the MSN service. (→ 2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service)

•

COS programming determines the extensions that are able to use this feature.

PC Programming Manual References

10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—ISDN-FWD (MSN) Set /
Cancel / Confirm
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—CO & SMDR—CF (MSN)

Feature Manual References

2.3.2 Call Forwarding (FWD)
5.1.1 Class of Service (COS)

Operating Manual References

1.6.1 Forwarding Calls

4.1.2.5  Call Forwarding (CF)—by ISDN (P-P)

Description

An extension user can forward the incoming ISDN call to another outside party using the ISDN service of
the telephone company, instead of the PBX feature, when the call is received through an ISDN line.
The network directly forwards the call to the destination which the extension user has set in the PBX as the
forward destination of trunk calls; the network is instructed by the PBX. This feature is available only when
the call is received through an ISDN port which supports this feature.
Call Forwarding—Unconditional (CFU), Call Forwarding—Busy (CFB), and Call Forwarding—No Reply
(CFNR) are applied to this feature.
 

[Example]

Outside Party

Outside Caller

Extn. 1011

Dials "01-45-6789".

CF Request 
to 01-23-4567

(DDI No.: 01-45-6789
 Forward Destination
 of Trunk Calls: 01-23-4567)

(DDI No.: 01-45-6789
 Forward Destination
 of Trunk Calls: 01-23-4567)

(01-23-4567)

ISDN

<FWD>

<Call Forwarding (CF)      by ISDN (P-P)>

PBX

Outside Party

Outside Caller

Extn. 1011

Dials "01-45-6789".

(01-23-4567)

ISDN

PBX

4.1.2 Integrated Services Digital Network (ISDN) Service Features

322

Feature Manual

Summary of Contents for KX-NSX1000









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands