manualshive.com logo in svg

Panasonic KX-NSX1000, Manual

Share
Download
Panasonic KX-NSX1000 Manual Download Page 278

PC Programming Manual References

23.2 UM Configuration—[4-2] Service Settings—Parameters—Automated Attendant—Call Hold Mode

3.2.1.21  Holiday Service

Description

Allows the system to override the normal settings assigned for the appropriate trunk service or port service
by playing a special holiday greeting. (e.g., "Happy New Year! Our office is closed today. If you wish to
record a message, please press 1 now".) A maximum of 24 holidays can be programmed. A holiday can be
a specific day or range of days.

Conditions

•

Holidays cannot overlap with each other.

•

The holidays stored in the Unified Messaging holiday table are managed separately from those in the
holiday table used for Time Service (→ 5.1.4 Time Service). However, holidays specified in the Time
Service holiday table can be copied to the Unified Messaging holiday table.

PC Programming Manual References

10.5 PBX Configuration—[2-5] System—Holiday Table—UM Holiday Table

3.2.1.22  Hospitality Mode

Description

Allows a subscriber to access certain subscriber services in a dedicated, 'hospitality' mode. Subscribers in
hospitality mode can listen to messages, change the password, change personal greetings, and change the
owner’s name, if enabled to do so through system programming. Also, it is possible to set whether the
password, personal greeting and owner name settings are deleted upon check-out.

PC Programming Manual References

21.1 UM Configuration—[2] Class of Service—Hospitality Mode

Feature Manual References

2.23 Hospitality Features

3.2.1.23  Intercept Routing to a Mailbox

Description

If the Intercept Routing destination is set to the floating extension number of the UM group, and the
"

Intercept to Mailbox for Call to Extension

" setting is enabled through system programming, intercepted

trunk calls will be redirected to the extension’s mailbox. Therefore the caller can leave a message in the
mailbox of the extension without knowing the mailbox number.

PC Programming Manual References

11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings—Intercept to Mailbox for Call to
Extension

Feature Manual References

2.1.1.6 Intercept Routing

3.2.1 System Features

278

Feature Manual

Summary of Contents for KX-NSX1000









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands