manualshive.com logo in svg

Panasonic KX-NSX1000, Manual

Share
Download
Panasonic KX-NSX1000 Manual Download Page 3

Depending on the NSX server’s software version, some features may not function. For details about which
versions support these features, consult your dealer.

•

Operation of the KX-NTV series depends on the NSX server software file version and the firmware
version of the KX-NTV series. You can confirm the compatibility on the Panasonic Web site:
http://www.panasonic.net/pcc/support/pbx/

References Found in the Feature Manual

Installation Manual References

The required installation instruction titles described in the 

Installation Manual

 are noted for your

reference.

PC Programming Manual References

The PC Programming titles and parameters described in the 

PC Programming Manual

 are noted for

your reference.

Feature Manual References

The related feature titles described in this 

Feature Manual

 are noted for your reference.

Operating Manual References

The operation required to implement the feature described in the 

Operating Manual

 is noted for your

reference.

Abbreviations

There are many abbreviations used in this manual (e.g., "PT", for proprietary telephone). Please refer to
the list in the next section for the meaning of each abbreviation.

About the other manuals

Along with this Feature Manual, the following manuals are available to help you install, and use this NSX
server:

Installation Manual

Provides instructions for installing the hardware and maintenance of the NSX server.

PC Programming Manual

Provides step-by-step instructions for performing system programming using a PC.

Operating Manual

Provides operating instructions for end users using IP-PTs, SIP phones, SLTs, PSs, or DSS Consoles.

Other Information

Trademarks

•

Microsoft and Outlook are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.

•

The Bluetooth

®

 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any

use of such marks by Panasonic Corporation is under licence.

•

All other trademarks identified herein are the property of their respective owners.

Note

•

The contents of this manual apply to NSX servers with a certain software version, as indicated on the
cover of this manual. To confirm the software version of your NSX server, refer to "How do I confirm
the software version of the NSX server or installed cards?" in 2.3 Frequently Asked Questions (FAQ)
of the PC Programming Manual.

•

Some optional hardware, software, and features are not available in some countries/areas, or for
some PBX models. Please consult your certified Panasonic dealer for more information.

Introduction

Feature Manual

3

Summary of Contents for KX-NSX1000









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands