Panasonic KX-HDV100, Operating Instructions Manual

Page: 50 / 60

System Settings Menu Layout
Status
Sub Item Description Setting Default
Line Status Displays the line status.
Registered
*1
/
Registering *1 /(NULL)
—
Firmware Version Displays the firmware version
of the telephone. — —
IP Mode Displays the IP network mode. IPv4/IPv6/IPv4&IPv6 —
IPv4 Settings Displays information about IPv4
settings.
–IP Address
*2
–Subnet Mask
*2
–Default Gateway
*2
–DNS
*2
—
IPv6 Settings Displays information about IPv6
settings. –IP Address *3
–Prefix
*3
–Default Gateway
*3
–DNS
*3
—
MAC Address Displays the MAC address of
the telephone. — —
CDP Displays the CDP status. On/Off —
LLDP Displays the LLDP status. On/Off —
VLAN Displays the VLAN ID and
priority. — —
*1 If you select this item and press
OK
, the phone number of the selected line is displayed.
*2 If this item is not set, “0.0.0.0” is displayed. If the telephone is not connected to the network, “…” is
displayed.
*3 If this item is not set, “0::0” is displayed. If the telephone is not connected to the network, “::” is
displayed.
Network Settings
The administrator password may be required for Network Settings. Contact your administrator for further
information.
For available characters, see “Character Table for Administrator Password”, Page 45.
Sub Item Description Setting Default
IP Mode Select Changes the network settings
of the telephone. Current
settings are displayed as a
highlight. –IPv4
–IPv6
–IPv4&IPv6 IPv4
50
Appendix