Connections
Connect the Ethernet cable, the Handset Cord and the AC adaptor to the unit.
*2
*1
*1 Hub
*2 AC adaptor
R
The initial setting for the IP address is "DHCP—Auto". For information about your network
environment, contact your administrator. For details, see “Network Settings”, Page 50.
When selecting Ethernet cables (not included)
R
Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack
when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.
*1
*1 60 mm (2 3/8 in) or less
40
Installation and Setup
Summary of Contents for KX-HDV100
Page 59: ...59 Notes...
