Panasonic KX-HDV100, Operating Instructions Manual

Page: 18 / 60

Making Calls
R You can confirm that the number was dialed correctly before calling (Predialing) by entering the
number, then going off-hook.
R To clear an entire number while predialing, press
Clear
for more than 1 second.
R To cancel dialing, press [CANCEL].
R To insert a 3 second pause between phone numbers, press
Pause
*1 .
It is useful when you want to operate voice mail service without listening to pre-recorded
announcement, for example. Repeat as needed to create longer pauses.
*1 This soft key is displayed only when configured on the telephone. Contact your administrator for
further information.
Basic Calling
Calling by Dialing
1. In standby mode, go off-hook.
2. Dial the outside party’s number.
3.
Call
4. Go on-hook to end the call.
Note
To dial a new number without going on-hook, follow the procedure below.
1.
Menu
2. [ D ]/[ C ]: "Flash/Recall"
3.
OK
Predialing
In standby mode, you can start dialing while still on-hook. After dialing the number, go off-hook to begin
the call.
Easy Dialing
Making a call using the redial list
The last phone number dialed is stored in the redial list (32 digits max.).
[In standby mode]
1. [REDIAL]
2. Go off-hook.
Hot Key Dialing
You can assign a phone number to each number key and then access the desired phone number by
simply pressing and holding the assigned number key.
1. Press and hold the dialing key (0–9) assigned as a Hot Key for more than 1 second.
2. Go off-hook.
18
Making Calls