Panasonic KX-HCM280, Service Manual

Page: 9 / 182

Indicator can be controlled on Indicator Control window on
Operating Instructions. Color indications are shown below.
Power on Not on the LAN
Orange Orange blinking *1
Orange
On the LAN
Orange Green blinking
Green
Normal Operation Green
Using
DHCP Getting IP address Green blinking
Finish getting IP
address Green
Updating Firmware Orange blinking
Pushing CLEAR SETTING button Orange blinking twice
Internal Failure of Network Camera Red blinking
*1) Orange indicator will continue blinking in the DHCP setting.
Lens and Pan/Tilt operation
Operation bar on the Single Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens
horizontally from -175° to +175° and vertically from -120° to 0° in mounting on the table and from
0° to +90° in mounting on the ceiling.
Note:
- When the power is on, do not manually revolve the Pan/Tilt.
Accidentally revolving or turning the pan / tilt mechanism while the
camera is powered on may cause the memorized camera positions
to change. If this occurs, please restart the camera by momentarily
disconnecting power.
- Do not touch the lens. It can take away the protective coating on the
lens. Fingerprints, dust, stains, etc. on the lens can also degrade
the performance of the Automatic Focusing feature.
5.2. REAR VIEW
9