![background image](http://html.mh-extra.com/html/panasonic/kx-hcm280/kx-hcm280_service-manual_277559040.webp)
that the White Balance Chart is displayed in the full screen.
7. Press the "OK" button.
8. After displaying "Please shoot Color Bar Chart", change the White
Balance Chart to the Color Bar Chart. Adjust the position and
zoom range so that the Color Bar Chart is displayed in the full
screen and the target on the screen is placed in the center of each
color, as shown in the following Figure.
9. Press the "OK" button.
10. When the adjustment completes with no error, the "Adjustment
OK" is displayed.
When the adjustment completes with an error, the error item is
displayed.
*In the case of "Adjustment NG", see SECTION 11.5 TROUBLESHOOTING of the TILT BLOCK
ASSY (Camera Unit).
Items which needs the adjustment
Items
Iris Adjustment
Trucking
Adjustment
Video
Adjustment
Replace the Lens Unit
O
O
-
Replace the CCD Circuit Board
-
O
O
Replace the IR Cut Filter
(PS0F1101)
-
O
O
CCD Unit (Lens Unit + CCD
Circuit Board)
O
O
O
Replace the Lens Circuit Board
O
O
O
Repair the Lens Block
O
-
-
Repair the Zoom/Focus Block
-
O
-
Replace the EEPROM (IC1009)
O
O
O
Dark Screen
O
-
O
Discolored
-
-
O
Out of Focus
-
O
-
Note:
Infinity lens must be inserted all the way into light box until reaching stop point.
- Viewing angle when taking the color bar chart
40
Summary of Contents for KX-HCM280
