Panasonic KX FP145 - Slim-Design Fax Machine Operating Instructions Manual Download

Page: 13 / 86

1. Introduction and Installation

For Fax Advantage assistance, call 1-800-435-7329.

Make sure that the ink film is wrapped
around the blue core (

) at least once.

Close the back cover securely by pushing
down on the notched area at both ends (

Close the front cover securely.

1.5.2 Replacing the ink film

The included film roll is a starter ink film. To
ensure that the unit operates properly, we
recommend the use of Panasonic replacement
film. See page 8 for accessory information.

We cannot be responsible for any damage to
the unit or degradation of print quality which
may occur from the use of non-Panasonic
replacement film.

Important:

Remove the recording paper and the
paper tray beforehand, or the paper may
misfeed or jam.

Open the covers (see steps 1 to 3 on page
10).

Remove the used core (

) and used ink film

(

Remove the stoppers (

) and tags (

) from

the new ink film (

Insert the ink film and close the covers (see
steps 4 to 7 on page 10).

Install the paper tray (page 12), then insert
the recording paper (page 12).

Correct

Tight

1 turn

Slack/Crease

Reverse

Incorrect

The ink film is not wrapped around the
blue core.

FP145.book Page 11 Thursday, January 15, 2004 10:46 AM

Summary of Contents for KX FP145 - Slim-Design Fax Machine























































































Search results

Summary of Contents for KX FP145 - Slim-Design Fax Machine

Reviews:

Related manuals for KX FP145 - Slim-Design Fax Machine

Brands by name

Popular brands

Panasonic KX FP145 - Slim-Design Fax Machine, Operating Instructions Manual

Search results

Summary of Contents for KX FP145 - Slim-Design Fax Machine

Reviews:

Related manuals for KX FP145 - Slim-Design Fax Machine

Brands by name

Popular brands