manualshive.com logo in svg

Panasonic KX-FM330E, Operating Instructions Manual, Page: 89 / 150

Share
Download
Panasonic KX-FM330E Operating Instructions Manual Download Page 89

87

Fax/Copy

Receiving Faxes

Auto disconnection

(KX-FP300 only)

This feature allows you to answer a call with the extension telephone during the silent fax recognition rings in
the TEL/FAX mode (p. 79). If you lift the handset of the extension telephone and enter 

(pre-selected

code) while the ring back tone is heard, the unit will be disconnected and you can talk with the other party.

Important:

●

This code should be different from the remote activation ID (p. 73) and the fax activation code (p. 83).

0

MENU

START/SET/COPY

/

1

Press .

Display:

2

Press , 

then 

.

3

Press .

4

Press or to 

select 

“ON”.

●

If this feature is not required, select “OFF”.

5

Press .

●

The display will show the pre-selected code.

6

Enter the new code.

●

This code can be from 2 to 4 digits in length
using 0 – 9, and 

.

7

Press .

8

Press .

MENU

SETUP ITEM [  ]

START/SET/COPY

CODE= 0

START/SET/COPY

MODE=ON

▼▲

START/SET/COPY

AUTO DISCONNECT

4 9

1.SYSTEM SET UP

MENU

Summary of Contents for KX-FM330E























































































































































Reviews:

No comments