Panasonic KX-FM330E Operating Instructions Manual Download Page 31

Page: 31 / 150

Setup

Initial Preparation

Fan the stack of paper to prevent a paper jam and
insert the paper into the paper tray.

●

The height of the stack of the paper should not
exceed the upper limit on the paper tray,
otherwise the paper may jam or multi-feed.

●

The paper should not be over the tab.

●

If the paper is not inserted correctly, readjust the
paper or the paper may jam.

Correct

Incorrect

Stack of
paper

Paper tray

Note:

●

Avoid paper with a cotton and/or fibre content that is over 20%, such as letterhead paper or those
used for resumes.

●

Do not use different types or thicknesses of paper in the paper tray at the same time. This may
cause a paper jam.

●

Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated,
damaged or wrinkled.

●

Avoid double-sided printing.

●

Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper
may jam.

●

Do not reinsert the ejected paper into the recording paper exit.

●

Some paper only accepts print on one side. Try using the other side of the paper if you are not happy with
the print quality.

Upper limit

Tab

Move the recording paper set lever back.

Recording paper
set lever

Adding paper to the paper tray

1. Pull the recording paper set lever forward.

●

The unit will beep and the following message will be
displayed.

Display:

2. Remove the installed paper.

3. Add paper to the removed paper and straighten.

4. Fan the stack of paper and insert it into the paper tray.

5. Move the recording paper set lever back.

CHECK LEVER

Recording paper
set lever

Summary of Contents for KX-FM330E























































































































































Search results

Summary of Contents for KX-FM330E

Reviews:

Related manuals for KX-FM330E

Brands by name

Popular brands

Panasonic KX-FM330E, Operating Instructions Manual

Search results

Summary of Contents for KX-FM330E

Reviews:

Related manuals for KX-FM330E

Brands by name

Popular brands