Panasonic KX-FM330E Operating Instructions Manual Download Page 131

Page: 131 / 150

129

Press .

Display:

Press ,

then

Press .

Press

to select the desired setting.

Press .

MENU

SETUP ITEM [ ]

START/SET/COPY

MODE=ON

▼▲

START/SET/COPY

FAX GUIDANCE

4 7

1.SYSTEM SET UP

MENU

START/SET/COPY

Fax voice guidance

(KX-FP320/KX-FM330 only)

You will hear the following voice guidance if this feature is set to on.

You can change this setting. The following choices are available.

ON:

The fax voice guidance will be heard at each transaction (pre-recorded setting).

OFF:

The fax voice guidance will not be heard.

ERROR: The fax voice guidance will only be heard when fax transmission/reception and friendly reception fail.

Start transmission.

Fax transmission start:

If friendly reception (p. 86) is activated, one of the following messages will also be heard.

Transmission is complete.
Transmission has failed.
Transmission has been interrupted.

Fax transmission result:

Start reception.

Fax reception start:

Reception is complete.
Reception has failed.
Reception has been interrupted.

Fax reception result:

Fax Voice Guidance

General Information

Start reception.

Please hang up the handset for
reception.

Summary of Contents for KX-FM330E























































































































































Search results

Summary of Contents for KX-FM330E

Reviews:

Related manuals for KX-FM330E

Brands by name

Popular brands

Panasonic KX-FM330E, Operating Instructions Manual

Search results

Summary of Contents for KX-FM330E

Reviews:

Related manuals for KX-FM330E

Brands by name

Popular brands