Panasonic KX-FM330E Operating Instructions Manual Download Page 74

Page: 74 / 150

Receiving Faxes

Receiving voice calls
The answering machine will record voice messages automatically.

Receiving fax calls
The fax machine will receive documents automatically.

Receiving a voice message and fax document in one call
The answering machine will record the voice message first. The fax machine will then be activated by the
caller’s request and receive the document. For further details, see next page.

How the fax machine and answering machine work

To use with an answering machine and computer, we recommend the
following setup.

Wall jack

Computer

Fax machine

Wall jack

Answering
machine
(not included)

We recommend you use separate wall jacks for the unit and the computer.

Note:

●

Set the TEL mode on the fax machine.

●

The device which has the shortest ring count will answer a call first. Confirm the ring count for each device.

●

If you use your computer as an answering machine, connect the telephone line cord from the EXT jack on
the back of the fax machine to the computer.

Summary of Contents for KX-FM330E























































































































































Search results

Summary of Contents for KX-FM330E

Reviews:

Related manuals for KX-FM330E

Brands by name

Popular brands

Panasonic KX-FM330E, Operating Instructions Manual

Search results

Summary of Contents for KX-FM330E

Reviews:

Related manuals for KX-FM330E

Brands by name

Popular brands