83
Receiving Faxes
Fax/Copy
Extension telephone
If you connect an extension telephone to your unit or the same line, you can receive fax documents using the
extension telephone. You do not have to press
on the unit.
Important:
●
Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
START/SET/COPY
1
When the extension telephone rings, lift the
handset of the extension telephone.
2
When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press
(pre-selected fax activation code)
firmly.
3
Hang up the handset.
●
The unit will start reception.
9
Fax activation code
The fax activation code is required in the following cases;
— to receive faxes using an extension telephone (see above).
— to receive a voice message and fax document in the same call (p. 73). (KX-FP300 only)
Important:
●
This code should be different from the remote activation ID (p. 73), the auto disconnection code (p. 87) and
remote operation ID (p. 102).
1
Press .
Display:
2
Press ,
then
.
3
Press .
4
Press or to
select
“ON”.
●
If this feature is not required, select “OFF”.
5
Press .
●
The display will show the pre-selected code.
6
Enter the new code.
●
This code can be from 2 to 4 digits in length
using 0 – 9, and
.
7
Press .
8
Press .
MENU
SETUP ITEM [ ]
START/SET/COPY
CODE= 9
START/SET/COPY
MODE=ON
▼▲
START/SET/COPY
FAX ACTIVATION
1
4
1.SYSTEM SET UP
MENU
Note:
●
You can change the fax activation code (see
below).
Note:
●
If you subscribe to any special telephone
company services which require a code, all
or part of the fax activation code must be
different from the service access code.
●
The fax activation code should not be set to
“0000”.
To EXT jack or
the same line
Extension telephone
MENU
START/SET/COPY
/
Summary of Contents for KX-FM330E
Page 149: ...147 ...
