9. Help
71
“
MODEM ERROR
”
L
There is something wrong with the unit’s modem. Contact our
service personnel.
“
NO FAX REPLY
”
L
The other party’s fax machine is busy or has run out of recording
paper. Try again.
“
OUT OF PAPER
INPUT TRAY #1
”
L
Recording paper is not installed or the input tray has run out of
paper. Install paper (page 19, 21).
L
Recording paper is not fed into the unit properly. Reinstall paper
(page 19, 21).
L
The paper input tray is not installed or is not inserted completely.
Insert the paper input tray into the unit.
Note:
L
“
#1
”
: Paper input tray
L
“
#2
”
: Manual input tray
“
PAPER JAMMED
”
“
OPEN TOP COVER
”
L
A recording paper jam occurred. Clear the jammed paper (page
82).
“
PC FAIL OR BUSY
”
L
The cable or the computer power cord is not connected correctly.
Check the connections (page 51).
L
The software is not running on the computer. Restart the software
and try again.
“
PLEASE WAIT
”
L
The unit is warming up. Wait for a while.
“
POLLING ERROR
”
L
The other party’s fax machine does not offer the polling function.
Check with the other party.
“
REDIAL TIME OUT
”
L
The other party’s fax machine is busy or has run out of recording
paper. Try again.
“
REMOVE DOCUMENT
”
L
The document is jammed. Remove the jammed document (page
86).
L
Attempted to send or copy a document longer than 600 mm using
the auto document feeder. Press
{
STOP
}
to remove the document.
Divide the document into two or more sheets and try again.
“
REMOVE PAPER IN
INPUT TRAY #2
”
L
The recording paper is installed in the manual input tray when
trying to copy, receive faxes or print reports. Remove the recording
paper from manual input tray.
“
REPLACE DRUM
”
“
CHANGE SUPPLIES
”
L
The drum unit’s service life is finished. Replace the drum unit
immediately (page 79).
“
RX MEMORY FULL
”
L
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 19)
or clear the jammed paper (page 82).
L
If feature #442 is set to
“
ALWAYS
”
(page 67), check the connection
between the computer and the unit.
“
TONER EMPTY
”
“
CHANGE SUPPLIES
”
L
The toner’s service life is finished. Replace the toner cartridge
immediately (page 79).
“
TONER LOW
”
“
CHANGE SUPPLIES
”
L
The toner life is near to an end. Replace the toner cartridge as
soon as possible (page 79).
“
TOP COVER OPEN
”
L
The top cover is open. Close it.
“
TRANSMIT ERROR
”
L
A transmission error occurred. Try again.
“
WARMING UP
”
L
The inside of the unit is cold. Let the unit warm up. Wait for a while.
Display
Cause & Solution
FLB803-813EX-PFQX2433ZA-en.book Page 71 Tuesday, April 25, 2006 6:45 PM
Summary of Contents for KX-FLB803EX
Page 101: ...99 Notes ...
