6. Copy
47
6 Copy
Copying
6.1 Using the unit as a
copy machine
6.1.1 Entering the copy mode
Before copying, set the operation mode to the
copy mode.
Press
{
COPY
}
to turn the
{
COPY
}
light ON.
Note:
L
You can change the default operation mode
(feature #463 on page 63) and the timer
before returning to the default operation
mode (feature #464 on page 63).
L
Copied documents will be stacked on the
upper output tray. You can change the output
tray for copying (feature #466 on page 68)
(KX-FLB813 only).
L
If the
{
FAX AUTO ANSWER
}
indicator is ON,
the unit can receive faxes automatically even
while the copy mode.
6.2 Making a copy
6.2.1 Using the auto document
feeder
L
Confirm that there are no documents on
the scanner glass.
1
If the
{
COPY
}
light is OFF, turn it ON by
pressing
{
COPY
}
.
2
Set the original.
1.
Adjust the width of the document guides
(
1
) to fit the actual size of the document.
2.
Insert the document (up to 40 pages)
FACE UP into the feeder until a single
beep is heard.
3
If necessary, change the following settings
according to the type of document.
L
To select the resolution, see page 48.
L
To select the contrast, see page 48.
4
If necessary, enter the number of copies (up
to 99).
5
Press
{
START
}
.
L
The unit will start copying.
6
After you finish copying, press
{
STOP
}
to
reset the settings you set in step 3 and 4.
Note:
L
Any document which can be sent as a fax can
also be copied and scanned (page 34).
The effective scanning area changes
according to the setting of the paper size.
L
Do not open the document cover when
making a copy with the auto document
feeder.
{
COPY
}
{
COPY
}
{
STOP
}
{
START
}
{V}{^}
{
CONTRAST
}
{
RESOLUTION
}
1
FLB803-813EX-PFQX2433ZA-en.book Page 47 Tuesday, April 25, 2006 6:45 PM
Summary of Contents for KX-FLB803EX
Page 101: ...99 Notes ...