Panasonic KX-FLB803EX Operating Instructions Manual Download Page 57

Page: 57 / 102

7. Multi-Function Station software

Printed label will be stacked on the upper
output tray (KX-FLB813 only).

Remove each label after printing.

Do not use the following types of labels:
–

Labels that are wrinkled, damaged or
separated from the backing sheet.

–

Any sheet of labels that has spaces in it
where some of the labels have been
removed.

–

Labels that do not completely cover the
backing sheet as follows.

7.4.4 Envelopes

Use envelopes designed for laser printing. We
recommend the following:
–

High quality envelopes of 90 g/m

paper,

–

Envelopes that have thin, sharply creased
leading edges,

–

Envelopes that have diagonal seams, and

–

Envelopes with a moisture content of 4% to
6% by weight.

Use the manual input tray to print
envelopes.

You can load 1 envelope of 90 g/m

paper

at a time for printing, print-side down (

Printed envelope will be stacked on the
upper output tray (KX-FLB813 only).

Remove each envelope after printing.

Note:

Wrinkles and waving may occur in some
cases, even if high quality envelopes are
used.

Avoid printing in high humidity. High humidity
may cause the envelope to curl or seal the
envelope.

Store envelopes away from moisture and
humidity, where they can lay flat and their
edges will not be bent or damaged.

Do not use envelopes with any of the
following characteristics (using these may
result in paper jams):

Irregularly shaped envelopes

Envelopes with curls, wrinkles, nicks, twists,
dog-ears or other damage

Envelopes with side seam construction

Highly textured envelopes, or envelopes with
extremely shiny surfaces

Envelopes that seal by removing a peel-off
strip

Envelopes with more than one flap to be
sealed

Self-adhesive envelopes

Envelopes that are baggy or not sharply
creased

Embossed envelopes

Envelopes that have previously been printed
on

Envelopes that include cotton and/or fibre
material

Side seam

construction

Peel-off strip

Multiple flaps

FLB803-813EX-PFQX2433ZA-en.book Page 55 Tuesday, April 25, 2006 6:45 PM

Summary of Contents for KX-FLB803EX







































































































Search results

Summary of Contents for KX-FLB803EX

Reviews:

Related manuals for KX-FLB803EX

Brands by name

Popular brands

Panasonic KX-FLB803EX, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB803EX

Reviews:

Related manuals for KX-FLB803EX

Brands by name

Popular brands