2. Preparation
16
2.2 Wall mounting the charger
1
Drive the screws (not included) into the wall using
the wall template as a guide.
2
Mount the charger (
1
), then slide it down (
2
) and to
the right (
3
) until it is secure.
2.3 Battery charge
Place the cordless handset on the cradle of the base unit
or charger for about
7 hours
before initial use.
L
The unit will beep once, the
[CHARGE]
indicator (
1
)
will light, and
“
Charging
”
will be displayed on the
cordless handset display.
L
After the cordless handset is fully charged,
displaying
“
Charge completed
”
, it may be left on
the base unit (or charger) without affecting the life of
the battery.
Base unit:
Charger:
Note:
L
To ensure the battery charges properly, clean the
charge contacts of the cordless handset (
2
) and the
charger (
3
) with a soft, dry cloth once a month.
Clean more often if the unit is subject to grease, dust,
or high humidity.
25.4 mm
(1 inch)
1
1
2
3
25.4 mm
(1 inch)
1
3
2
2
3
FG5642C-PFQX2641ZA-en.book Page 16 Thursday, June 29, 2006 11:36 AM
