Panasonic KX-FG5642C Operating Instructions Manual Download | Manualshive

Page: 62 / 76

background image

10. Help

62

10.3.5 Fax – receiving

The other party complains
that letters on their received
document are distorted or not
clear.

L

If your line has special telephone services such as call waiting, the service
may have been activated during fax transmission. Connect the unit to a line
that does not have these services.

L

An extension telephone on the same line is occupying the line. Hang up the
extension telephone and try again.

L

Try copying the document with this unit. If the copied image is clear, there
may be something wrong with the other party’s machine.

The other party complains
that black lines, white lines or
smudges appear on their
received document.

L

The scanner glass or rollers are dirty with correction fluid, etc. Clean them
(page 67). Please do not insert a document before correction fluid has dried
completely.

Documents frequently
misfeed.

L

Clean the document feeder rollers, recording paper feeder and rubber flap
(page 67).

Problem

Cause & Solution

I cannot receive documents.

L

You may have subscribed to a voice mail service due to service packs
offered by your telephone company. Fax and voice message reception may
not be possible when voice mail is activated so we recommend you to:
–

contact your telephone company and request to deactivate voice mail
service, or

–

subscribe to a Distinctive Ring service (page 39).

L

The ink film is empty. Replace the ink film with a new one (page 11).

I cannot receive documents
automatically.

L

The receiving mode is set to TEL mode.
Change the receiving mode:
–

TAM/FAX mode (page 37) or FAX ONLY mode (page 37).

L

The time taken to answer the call is too long. Decrease the number of rings
in feature #06 or feature 061 (page 47).

L

The greeting message is too long. Record a shorter message (page 42).

L

Make sure that the Distinctive Ring of feature #31 is set properly (page 49).
If you do not subscribe to the Distinctive Ring service offered by your local
telephone company, this feature should be OFF.

The display shows
“

CONNECTING.....

”, but

faxes are not received.

L

The receiving mode is set to FAX ONLY mode and the incoming call is not
a fax. Change the receiving mode:
–

TAM/FAX mode (page 37) or TEL mode (page 36).

A blank sheet is ejected.

L

If a blank sheet is ejected after the received document is printed out, the
size of the document sent by the other party is as large as, or larger than,
the recording paper, and the receiving reduction rate is not programmed
correctly. Program the proper rate in feature #36 (page 50).

L

The other party placed the document in their fax machine facing the wrong
way. Check with the other party.

Problem

Cause & Solution

FG5642C-PFQX2641ZA-en.book Page 62 Thursday, June 29, 2006 11:36 AM

«
...
60
61
62
63
64
...
»

Summary of Contents for KX-FG5642C













































































Reviews:

No comments

Related manuals for KX-FG5642C

Brand: Jack Pages: 7

Brand: Jack Pages: 22

Brand: Panasonic Pages: 8

Brand: Singer Pages: 48

Brand: Oki Pages: 248

Brand: General Pages: 20

Brand: Tornado Pages: 11

Brand: Reliable Pages: 44

Brand: UnionSpecial Pages: 72

Neofold HS 1250

Brand: Neolt Pages: 114

Brand: Olivetti Pages: 216

Brand: Singer Pages: 25

Brand: DIAKAT Pages: 11

Brand: Karma Pages: 12

Brand: Muratec Pages: 86

Brand: JUKI Pages: 72

LK-1900B series

Brand: JUKI Pages: 174

JURASSIC PARK PRO

Brand: Stern Pinball Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands