Panasonic KX-FC962FX Page 9 Operating Instructions Manual Download

Page: 9 / 108

1. Installation and Quick Start

1.6 Recording paper

Open the top cover by pressing the top cover
release button (

Install the recording paper.

Insert the leading edge of the paper into the
opening above the thermal head (

Pull the paper out of the unit.

Make sure that there is no slack in the
paper roll.

Close the top cover securely by pushing
down on both sides.

Press

{

FAX/START

}

to cut the paper.

Correct

Incorrect

Note:

If the paper is secured with glue or tape,
cut approximately 15 cm from the
beginning of the roll before installing it.

When the power cord is connected, a
message is printed each time the top
cover is opened then closed. If the
recording paper is installed upside down,
the message will not be printed. Install the
paper correctly.

For accessory information, see page 5.

{

FAX/START

}

FC962FX-PFQX2294ZA-en.book Page 9 Friday, August 26, 2005 9:05 PM

Summary of Contents for KX-FC962FX













































































































Search results

Summary of Contents for KX-FC962FX

Reviews:

Related manuals for KX-FC962FX

Brands by name

Popular brands

Panasonic KX-FC962FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FC962FX

Reviews:

Related manuals for KX-FC962FX

Brands by name

Popular brands