Panasonic KX-FC962FX, Operating Instructions Manual

Page: 19 / 108

3. Preparation
19
3.6 Adjusting base unit
volume
Ringer volume
While the unit is idle, press
{A}
or
{B}
.
L
If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
To turn the ringer OFF
1. Press
{B}
repeatedly to display “
RINGER
OFF= OK?
” .
2. Press
{
SET
}
.
L
When a call is received, the base unit will not
ring for outside calls and will display
“
INCOMING CALL
” . The base unit will ring at
the low level for intercom calls.
L
To turn the ringer back ON, press
{A}
.
Ringer type
L
You can select the ringer types from one of 6
types for outside calls (feature #17 on page
63).
Handset receiver volume
While using the handset, press
{A}
or
{B}
.
Speaker volume
While using the speakerphone, press
{A}
or
{B}
.
Answering machine volume
While listening to messages, press
{A}
or
{B}
.
Initial Programming
3.7 Dialling mode
If you cannot dial (page 24, 39), change this
setting depending on your telephone line
service.
3.7.1 With the cordless handset
1
Press
{j
/OK
}
.
2
Select “
Base Unit Setup
” , then press
{>}
.
3
Enter “
0000
” (default base unit PIN).
L
If you changed the PIN, enter it (page 75).
4
Select “
Call Options
” , then press
{>}
.
5
Select “
Dial Mode
” , then press
{>}
.
6
Select the desired setting, then press
{>}
.
– “
Tone
” (default): For tone dial service.
– “
Pulse
” : For rotary pulse dial service.
7
Press
{ih}
.
3.7.2 With the base unit
1
Press
{
MENU
}
.
SYSTEM SETUP
PRESS [
( )
]
2
Press
{
<
}
or
{
>
}
repeatedly to display the
following.
DIALLING MODE
=TONE [
±
]
{A}{B} {
SET
}
{ih}
{j
/OK
}
{>}
{A}{B}{
<
}{
>
} {
MENU
} {
SET
}
FC962FX-PFQX2294ZA-en.book Page 19 Friday, August 26, 2005 9:05 PM