Panasonic KX-FC962FX Operating Instructions Manual Download Page 18

Page: 18 / 108

3. Preparation

3.4 Turning the cordless
handset power ON/OFF

3.4.1 Power ON

Press

{ih}

for about 1 second.

The display will change to the standby mode.

3.4.2 Power OFF

Press

{ih}

for about 2 seconds.

The display will go blank.

Volume

3.5 Adjusting cordless
handset volume

Ringer volume

Press

/OK

}

Select

“

Handset Setup

”

, then press

{>}

Select

“

Ringer Setup

”

, then press

{>}

Select

“

Ringer Volume

”

, then press

{>}

Press

{e}

{v}

repeatedly to select the

desired volume.

Press

{>}

Press

{ih}

Note:

Alarms will sound and the cordless handset
will ring for intercom calls and when paged
even if the ringer is turned OFF.

Ring tone

You can select one of 15 ring tones for outside
calls and intercom calls (page 72). Caller ID
service users can also use a different ringer for
each category (page 34).

Receiver volume

While using

{C}

{

INT

}

, press

{e}

{v}

Speaker volume

While using

{s}

, press

{e}

{v}

{ih}

{

INT

}

/OK

}

{C}

{s}

{>}{e}{v}

FC962FX-PFQX2294ZA-en.book Page 18 Friday, August 26, 2005 9:05 PM

Summary of Contents for KX-FC962FX













































































































Search results

Summary of Contents for KX-FC962FX

Reviews:

Brands by name

Popular brands

Panasonic KX-FC962FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FC962FX

Reviews:

Brands by name

Popular brands