9. Programmable Features
72
9.5.1 Programmable functions
Helpful hints:
L
To exit programming, press
{ih}
at any
time.
9.5.2 Alarm
Setting alarm
An alarm will sound for 3 minutes at the set time
once or daily.
Set the date and time beforehand (page 20).
1.
Press
{j
/OK
}
.
2.
Select
“
Handset Setup
”
, then press
{>}
.
3.
Select
“
Time Settings
”
, then press
{>}
.
4.
Select
“
Alarm
”
, then press
{>}
2 times.
5.
Select an alarm mode, then press
{>}
.
–
“
Once
”
: The alarm will sound once at the
set time. Enter the desired day and month
by selecting 2 digits for each.
–
“
Daily
”
: An alarm will sound daily at the
set time.
–
“
Off
”
(default): Turns the alarm OFF.
Press
{>}
again, then press
{ih}
to
finish.
6.
Enter the desired hour and minute by
selecting 2 digits for each.
L
You can select
“
AM
”
,
“
PM
”
or 24-hour
time entry by pressing
{*}
repeatedly.
7.
Press
{j
/OK
}
.
8.
Select the ring tone that will sound at the set
time, then press
{>}
.
9.
Select
“
Save
”
, then press
{>}
.
10.
Press
{ih}
.
Note:
L
To stop the alarm, press any dial key.
L
When the cordless handset is in talk or
intercom mode, the alarm will not sound until
the call has ended.
L
Alarm volume depends on cordless handset
ringer volume (page 18).
L
The alarm will sound at the set time even
when the ringer is turned OFF.
L
If you select
“
Once
”
, the setting will be
changed to
“
Off
”
after the alarm sounds.
9.5.3 Ringer options
Changing ring tones
You can choose the ring tone used by the
cordless handset.
“
Ext. Ringtone
”
: Selects the ring tone for
outside calls.
“
Int. Ringtone
”
: Selects the ring tone for
intercom calls.
1.
Press
{j
/OK
}
.
2.
Select
“
Handset Setup
”
, then press
{>}
.
3.
Select
“
Ringer Setup
”
, then press
{>}
.
4.
Select the desired item, then press
{>}
.
5.
Select the desired ring tone, then press
{>}
.
6.
Press
{ih}
.
Note:
L
If you select one of the melody ring tones, the
ring tone will continue to sound for several
seconds if the caller hangs up before you
answer. You may hear a dial tone or no one
on the line when you answer a call.
L
The preset melodies in this product are used
with permission of © 2004 M-ZoNE Co., Ltd.
L
To set the base unit ring tone, see feature #17
on page 63.
9.5.4 Display setup
Selecting the standby mode display
“
Base Number
”
: The current base unit number
is displayed.
“
Handset Number
”
: The current cordless
handset number is displayed.
“
Off
”
(default): Only the current date and time
are displayed.
1.
Press
{j
/OK
}
.
2.
Select
“
Handset Setup
”
, then press
{>}
.
3.
Select
“
Display Setup
”
, then press
{>}
.
4.
Select
“
Standby Display
”
, then press
{>}
.
5.
Select the desired setting, then press
{>}
.
6.
Press
{ih}
.
Note:
L
If
“
Base Number
”
is selected and the
current base unit number is 2,
“
-2-
”
is
displayed.
{ih}
{j
/OK
}
{C}
{>}{e}{v}
FC962FX-PFQX2294ZA-en.book Page 72 Friday, August 26, 2005 9:05 PM
Summary of Contents for KX-FC962FX
Page 106: ...106 Notes ...
Page 107: ...107 Notes ...
