Panasonic KX-FC962FX, Operating Instructions Manual

Page: 33 / 108

4. Telephone
33
5. Press
{A}
or
{B}
repeatedly to select “
ON
”
or “
OFF
” (default), then press
{
SET
}
.
6. Press
{
MENU
}
.
Note:
L
When the night mode is turned ON, “
[N]
” is
displayed.
Setting the start and end time for night
mode
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
3
}{
5
}
.
3. Press
{
SET
}
.
4. Press
{A}
or
{B}
repeatedly to select
“
START/END
” , then press
{
SET
}
.
5. Enter the desired hour and minute you wish
to start this feature by selecting 2 digits for
each.
L
If you use 12-hour time entry, select “
AM
”
or “
PM
” by pressing
{*}
repeatedly
before entering the time.
6. Enter the desired hour and minute you wish
to end this feature by selecting 2 digits for
each.
L
If you use 12-hour time entry, select “
AM
”
or “
PM
” by pressing
{*}
repeatedly
before entering the time.
7. Press
{
SET
}
.
8. Press
{
MENU
}
.
Setting the ring delay for night mode
This setting allows the base unit to ring during
night mode if the caller waits long enough. After
the selected delay time has passed, the base
unit will ring. If you select
“
NO RINGING
” , the
base unit will not ring during night mode.
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
3
}{
5
}
.
3. Press
{
SET
}
.
4. Press
{A}
or
{B}
repeatedly to select “
RING
DELAY
” , then press
{
SET
}
.
5. Select the desired setting.
“
30s
” : 30 seconds
“
60s
” (default): 60 seconds
“
90s
” : 90 seconds
“
120s
” : 120 seconds
“
NO RINGING
” : the base unit will not ring.
6. Press
{
SET
}
.
7. Press
{
MENU
}
.
Caller ID
4.8 Caller ID service
This unit is compatible with Caller ID service
offered by your local telephone company. To
use this feature, you must subscribe to Caller
ID service.
Important:
L
This unit is designed in accordance with
the ETS (European Telecommunication
Standard) and only supports the basic
CLIP (Calling Line Identification
Presentation) features.
L
This unit will only display the caller’s
telephone number and name.
L
This unit will not support future additional
telephone services.
L
Depending on the service of the local
telephone company, the date/time of the
call or the caller’s name may not be
displayed.
Make sure the following ring setting is set to
2 or more rings beforehand.
– FAX ring setting (feature #06 on page 63)
– TEL/FAX ring setting (feature #78 on page
67)
4.8.1 How Caller ID is displayed
When an outside call is received, the calling
party’s telephone number or name will be
displayed. You then have the option of whether
or not to answer the call.
The unit will automatically store caller
information (telephone number, name, date and
time of the call) of the last 30 callers. Caller
information is stored by the most recent to the
oldest call. When the 31st call is received, the
oldest call is deleted.
Caller information can be viewed on the display
one item at a time (page 35) or confirmed by
printing the Caller ID list (page 99).
Note:
L
Caller information can be displayed up to 16
digits/characters for the base unit and 22
digits/16 characters for the cordless handset.
L
When caller information is received and it
matches a telephone number stored in the
unit’s phonebook:
–
The stored name will be displayed and
logged.
– The cordless handset will use the ring
tone assigned to the caller’s category.
L
If the unit is connected to a PBX (Private
Branch Exchange) system, caller information
FC962FX-PFQX2294ZA-en.book Page 33 Friday, August 26, 2005 9:05 PM