52
Receiving Faxes
Pager call - when the unit receives a fax or
!
voice message
!
This feature allows your unit to call your pager when your unit receives a fax document or an
incoming voice message.
1
Press
p
.
Display:
2
Press
#
, then
70
.
3
Press
+
or
-
to select “ON”.
●
If this feature is not required, select “OFF”.
4
Press
w
.
5
Enter your pager number.
●
You can enter a total of 46 digits and/or
pauses.
Example:
1 202 555 1234PP12345678PP5555#
PAGER CALL
MODE=ON
[±]
PAGER CALL
MODE=OFF
[±]
SYSTEM SET UP
PRESS NAVI.[
I H
]
6
Press
w
.
●
The unit will dial the stored
number.
7
Check that your pager received the
pager test call.
8
Press
NO
.
PAGER TEST
Extension telephone
!
To the same line
Extension telephone
Note:
●
You can change the fax activation code in
feature #41 (p. 74).
If you use the fax machine with an extension telephone, you can receive fax documents using
the extension telephone. You do not have to press
j
on the fax machine.
Important:
●
Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
1
When the extension telephone rings, lift the
handset of the extension telephone.
2
When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press
*9
(pre-selected fax activation
code) firmly.
3
Hang up the handset.
●
The fax machine will start reception.
Your pager
number
Pauses
Your pager access
code, if required.
Message you want
displayed on your pager.
When your pager receives a pager call
Your pager will display the message you
entered in step 5. (For example: 5555)
