Panasonic KX-FC175AL Page 86 Operating Instructions Manual Download

Page: 86 / 96

Jams

Recording paper jam

Open the front cover by pulling up the centre
part.

If the unit does not eject any recording paper during fax reception or copying, the recording
paper has jammed and the display will show the following.

Display:

PAPER

JAMMED

Push the back cover open button (green) on
the right side of the unit.
OR
Push the back cover open lever (green)
inside of the unit.

Back cover
open lever
(green)

Back cover
open button
(green)

Front
cover

Centre part

Remove the jammed recording paper.

Open the back cover.

Dotted
area

Front cover

Back cover

“T” shaped gear
(blue)

Ink film

Turn the “T” shaped gear (blue) in the
direction of the arrow.

●

Make sure that the ink film is
wrapped around the blue core
at least once.

Close the back cover securely by pushing
down on the dotted area at both ends (

Close the front cover securely (

Slack

Reverse

Tight

Correct

Blue core

The ink film is not wrapped
around the blue core.

Incorrect

Jammed
recording
paper

Back
cover

Summary of Contents for KX-FC175AL

































































































Search results

Summary of Contents for KX-FC175AL

Reviews:

Related manuals for KX-FC175AL

Brands by name

Popular brands

Panasonic KX-FC175AL, Operating Instructions Manual

Search results

Summary of Contents for KX-FC175AL

Reviews:

Related manuals for KX-FC175AL

Brands by name

Popular brands