Panasonic KX-FC175AL Operating Instructions Manual Download Page 35

Page: 35 / 96

Caller ID

To display the caller’s telephone number

Press

after step 2.

Example (for Australian users):

Example (for New Zealand users):

Note:

●

Telstra, Optus and Telecom New Zealand do not currently send a NAME for Caller ID.

SAM LEE
11:20A Jul20

3456789012
11:20A Jul20

SAM LEE
11:20A Jul20

Press

Example:

(2 new calls are received)

2 NEW CALLS
PRESS NAVI.[+ -]

FACE D

OWN

TALK

STOP

DIGITAL SP-PHONE

FAX/START

CALLER ID

Display while viewing

When the unit could not receive a name.

When no calls have been received.

NO CALLER DATA

NO NAME RCVD

This means this call has already
been viewed or answered.

Using the base unit

To stop viewing

Press

{

after step 2.

Press

to show the most recent caller

information.
Press

to show the calls which have

already been viewed.

Handset is off the base unit:
Press

on the handset to call back

the displayed party.

Handset is on the base unit:
Press

or lift the

handset and press

●

The unit will start dialling automatically.

●

To send a fax – insert the document FACE
DOWN and press

(p. 40).

Summary of Contents for KX-FC175AL

































































































Search results

Summary of Contents for KX-FC175AL

Reviews:

Panasonic KX-FC175AL, Operating Instructions Manual, Page: 35 / 96

Search results

Summary of Contents for KX-FC175AL

Reviews: