Panasonic KX-FC175AL Page 87 Operating Instructions Manual Download

Page: 87 / 96

Jams / Battery

Replacing the handset battery

Replace the battery with a new Panasonic rechargeable battery Model No. P-P510. See
page 10 for accessory information.
To prevent memory loss, replace the battery within 3 minutes.

Disconnect the battery connector and remove
the used battery.

Carefully insert a flat metal object in the slot,
and push forward to release the lock.
Remove the handset cover off the handset.

Handset
cover

Connect the battery connector of the new
battery, and insert the battery into the
handset. Place the battery leads inside the
groove.

New battery

Battery
connector

Groove

Battery leads

Replace the handset cover on the handset.

●

Be sure to charge the new battery for about
6 hours before use (p. 22).

Battery
connector

Used battery

Document jams – sending

Open the front cover by pulling up the centre
part.

Remove the jammed document carefully.

Close the front cover securely.

Centre part

Jammed
document

Front cover

Note:

●

Do not pull out the jammed paper forcibly before
opening the front cover.

If the unit does not release the document during feeding, remove the jammed document as follows:

Summary of Contents for KX-FC175AL

































































































Search results

Summary of Contents for KX-FC175AL

Reviews:

Related manuals for KX-FC175AL

Brands by name

Popular brands

Panasonic KX-FC175AL, Operating Instructions Manual

Search results

Summary of Contents for KX-FC175AL

Reviews:

Related manuals for KX-FC175AL

Brands by name

Popular brands