51
Initialize/restart the camera [Initialization]
Click the [Initialization] tab of the "Maintenance" page. (
☞
page 49)
Initialization of the settings and data of the camera and restarting of the camera can be performed on this page.
[Initialize setup data]
Click the [Execute] button to reset the settings to the
default settings. However, the network settings will not
be reset.
It is impossible to operate the camera for around 2 min-
utes after the initialization.
[Initialize HTML data]
Click the [Execute] button to reset the HTML files to the
default settings. It is impossible to operate the camera
for around 2 minutes after the initialization.
[Initialize setup data and HTML data]
Click the [Execute] button to reset the settings and the
HTML files to the default settings. However, the network
settings will not be reset.
It is impossible to operate the camera for around 2 min-
utes after the initialization.
[Restart]
Click the [Execute] button to restart the camera. It is
impossible to operate the camera for around 2 minutes
after the restart just as when the power is turned on.
Notes:
• Turn on the power of the camera while holding down
the [INITIAL SET] button of the camera, and wait
around 5 seconds without releasing the [INITIAL
SET] button.
Wait around 30 seconds after releasing the button.
The settings including the network settings (
☞
page
41) will be initialized.
• When the "E-mail notification" function is on, notifica-
tion mail will be sent to the registered addresses
when failed to mount the SD memory card after the
restart or when the inserted SD memory card is
locked. (
☞
page 35)
