Panasonic HYBRID IP-PBX KX-TDA100, Features Manual

Page: 27 / 380

1.1 Incoming Call Features
Feature Guide 27
1.1.1.5 Calling Line Identification (CLI) Distribution
Description
Directs an incoming trunk call to a destination when the caller’s identification number (e.g.,
Caller ID) matches the number in the System Speed Dialling Table which is used as the Caller
ID Table. Each Caller ID number (telephone number for each System Speed Dialling number)
can have its own destination.
CLI always works in conjunction with the following call distribution methods:
a)
DIL
b)
DID/DDI
c)
MSN Ringing Service
Each trunk (for DIL) and the DID/DDI/MSN number can enable or disable the CLI feature for
each time mode (day/lunch/break/night) (
2.2.4 Time Service).
When the call has its Caller ID and the CLI is enabled for the time mode, the call will be handled
by the CLI method.
[Programming Example of System Speed Dialling Table for CLI]
CLI Feature Description Details in
Caller ID (KX-TDA30/KX-
TDA100/KX-TDA200 only) Caller’s number is sent from an analogue
trunk. • 1.17.1 Caller
ID
Calling Line Identification
Presentation (CLIP) Caller’s number is sent from an ISDN line. • 1.20.1.2
Calling/
Connected
Line
Identification
Presentation
(CLIP/COLP)
Automatic Number
Identification (ANI) (KX-
TDA100/KX-TDA200 only) Caller’s number is sent from an E1 or T1
line. • 1.21.1 E1
Line Service
(KX-TDA100/
KX-TDA200
only)
• 1.22.1 T1
Line Service
(KX-TDA100/
KX-TDA200
only)
Location
(System Speed
Dialling No.)
Telephone No. *1
System Speed
Dialling Name
*2
CLI Destination
000 901234567890 ABC Company 200
001 : : :
: : : :