Panasonic HYBRID IP-PBX KX-TDA100, Features Manual

Page: 245 / 380

1.27 Audible Tone Features
Feature Guide 245
1.27 Audible Tone Features
1.27.1 Dial Tone
Description
The following dial tones inform extensions about features activated on the extensions:
Each dial tone type has two frequencies (e.g., dial tone 1A and dial tone 1B).
Conditions
• Dial Tone Type A/B
It is possible to select dial tone type A or B for dial tones 1 through 4. If "
Type A
" is
selected, all dial tones 1 through 4 will become dial tone type A.
The dial tone type for the ARS feature can be selected separately. If "
Type A
" is selected
for the ARS, dial tone 1A will be heard. If "
Type B
" is selected, dial tone 1B will be heard.
• Distinctive Dial tone
Distinctive dial tone mode can be disabled. In this case, dial tone 1 will be sent.
• Dial Tone Patterns
All dial tone patterns have a default (
4.2.1 Tones/Ring Tones).
• Only dial tone 1 is sent to the extensions in the VM (DPT/DTMF) group. ( 1.23.1 Voice
Mail (VM) Group)
Type Description
Tone 1A/1B A normal dial tone is heard when:
a) No features listed for dial tones 2 through 4 has been set, or
b) ARS is used.
Tone 2A/2B Any one of the features below is set.
• Absent Message
• BGM
• FWD
• Call Pickup Deny
• Call Waiting
• DND
• Extension Lock
• Executive Busy Override Deny
• Hot Line
• Timed Reminder
Tone 3A/3B While a called PS is being searched, or any one of the features
below is performed.
• Account Code Entry
• Consultation Hold
• Answering a Timed Reminder call with no message
Tone 4A/4B Messages are waiting for the extension.