Panasonic HYBRID IP-PBX KX-TDA100, Features Manual

Page: 228 / 380

1.24 Portable Station (PS) Features
228 Feature Guide
• The following features are not available for extensions in Wireless XDP Parallel Mode
while the PS is on a call (however, they are available for the extensions in Wireless XDP
Parallel Mode while the wired telephone is on a call):
• Most of the extension data (e.g., extension number, extension name) of the wired
telephone is used for its PS as well. However, the PS has its own extension data for the
following:
Note
To change the setting of the extension data above, the setting for the wired telephone
or the PS must be changed individually. When changing the PS setting, use the PS’s
original extension number (not the main telephone’s extension number), if required.
• When the Wireless XDP Parallel Mode has been set, the following extension data for the
wired telephone is copied to the PBX extension data for the PS and the extension data
remains there even when the Wireless XDP Parallel Mode is cancelled.
• If the Extension Feature Clear is performed, the corresponding extension data for both the
wired telephone and the PS will be cleared. (
1.26.2 Extension Feature Clear)
• When a call arrives, both the wired telephone and the PS ring. However, in the following
cases only the person who made the setting will receive ringing:
– Executive Busy Override
– Whisper OHCA (
1.7.4.4 Whisper OHCA)
– CCBS ( 1.20.1.10 Completion of Calls to Busy Subscriber (CCBS))
– Ring Tone Pattern Table Selection ( 1.1.3.2 Ring Tone Pattern Selection)
– Preferred Line Assignment—Incoming ( 1.4.1.2 Line Preference—Incoming)
– Preferred Line Assignment—Outgoing ( 1.5.5.2 Line Preference—Outgoing)
– Hot Line Setting ( 1.6.1.7 Hot Line)
– Transfer Recall Destination for Call Transfer and Call Park
– Display Language (
1.19.4 Display Information)
– ISDN Bearer Mode ( 1.20.1.1 Integrated Services Digital Network (ISDN)—
SUMMARY)
– Flexible Button Assignment ( 1.19.2 Flexible Buttons)
– Call Waiting Setting ( 1.1.3.3 Call Waiting)
– FWD/DND Setting ( 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
– Call Pickup Deny Setting ( 1.4.1.3 Call Pickup)
– Executive Busy Override Deny Setting
– Itemised Billing Code for ARS (
1.9.1 Automatic Route Selection (ARS))
– Transfer Recall Destination for Call Transfer and Call Park
– CLIP/COLP Number (
CLIP/COLP Number [606])
– CLIP/COLP Number Selection
– CLIR Setting
– COLR Setting
– Extension Personal Identification Number (PIN) (
Extension Personal
Identification Number (PIN) [005]) ( 1.26.1 Extension Personal Identification
Number (PIN))
– COS Programming ( Class of Service [602]) ( 2.2.1 Class of Service (COS))
– User Group ( User Group [603]) ( 2.2.2 Group)
– Automatic Callback Busy