![Panasonic HomeCHEF NU-SC180 Owner'S Manual Download Page 50](http://html.mh-extra.com/html/panasonic/homechef-nu-sc180/homechef-nu-sc180_owners-manual_274230050.webp)
- Eng-50 -
“U50” appears in the
display window.
“H00” appears in the
display window.
White powder found at
steam outlet, drip tray
and oven cavity.
If it seems there is a problem with the oven, contact an authorized Service Center by Panasonic.
The cavity temperature is
overheated.
Operate again after cavity temperature
cooling down and “U50” disappears.
There is a problem with the oven.
Please contact the service center specified
by Panasonic.
Before Requesting Service
(continued)
PROBLEM
POSSIBLE CAUSE
REMEDY
The white powder is mineral
crystal from evaporation of
water, it is natural substance
and harmless to human body.
You can use auto cleaning menu with
Auto Program 23&24 to clean the steam
system and water supply pipe to improve
condition. If crystal attached to the nozzle
or in the oven cavity, please wipe and
clean with a wring cloth. After using steam
function or cleaning, pour out the water
from the drip tray and wipe with a sponge.
No steam.
Check whether the water tank
has water.
Fully fill the water tank and properly install it.
Check whether the integrated water
tank is installed correctly in place.
“U14” appears in the
display window.
The water tank lacks water.
Even it is full of water, “U14” will
appears in the display window in
different conditions.
“U14” appears in the first two cooking
stages, you can refill water and press
Start/Set
button to continue. It is not
available if “U14” appears in the third
time. Please fill the water tank with water
again. Replace to the oven and press
Stop/Reset
to reset.
If it is not cleaned in time after “
”
appears in the display window,
scale will accumulate around the
inner wall of the water-piping.
Please use the citric acid cleaning function
to clean the water-piping.
F0003CF00AP_EN_20220122.indd 50
F0003CF00AP_EN_20220122.indd 50
2022/1/22 14:30:59
2022/1/22 14:30:59