33
VQT1Y31
Preparation
Setup
6
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
Change the mode to
or
.
1
Select the menu. (
F
28)
2
Touch the date or time to be set,
then set the desired value using
/
.
The year will change as follows:
2000, 2001, ..., 2039, 2000, ...
The 12-hour system is used to display the time.
appears on the right top of the screen
when [SET WORLD TIME] (
F
34) is set to
[HOME], while
appears when it is set to
[DESTINATION].
3
Touch [ENTER].
The clock function starts at [00] seconds.
A message prompting for World time setting
may be displayed. Perform the World time
setting by touching the screen. (
F
34)
Touch [EXIT] or press the MENU button to
complete the setting.
Changing the date and time display mode
Select the menu. (
F
28)
[SETUP]
[DATE/TIME]
desired display
style
You can also show or change the date and
time display by repeatedly pressing the DATE/
TIME button on the remote control.
Changing the date format
Select the menu. (
F
28)
[SETUP]
[DATE FORMAT]
desired
display style
The date and time function is driven by a built-
in lithium battery.
If the time display becomes [- -], the built-in
lithium battery needs to be charged. To
recharge the built-in lithium battery, connect
the AC adaptor or attach the battery to this
unit. Leave the unit as it is for approx. 24 hours
and the battery will maintain the date and time
for approx. 6 months. (The battery is still being
recharged even if the power is off.)
[SETUP]
[CLOCK SET]
[YES]
[DATE]
[D/T]
[OFF]
Display style
Screen display
[Y/M/D]
2009. 11. 15
[M/D/Y]
NOV 15 2009
[D/M/Y]
15. 11. 2009
12:34PM
NOV 15 2009
NOV 15 2009
