22
VQT1Y31
Charging/Recording time
Temperature: 25
C (77
F)/humidity: 60%
* The battery pack holder kit VW-VH04 (optional) is necessary.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely. Charging
time and recordable time vary depending on the usage conditions such as high/low
temperature.
The actual recordable time refers to the recordable time when repeatedly starting/stopping recording,
turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
Charging and recording time
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
destination
Recording
mode
Maximum
continuously
recordable time
Actual
recordable
time
Supplied battery/
VW-VBG130
(optional)
[7.2 V/1250 mAh]
2 h 35 min
HDD
HA/HG/HX/
HE
1 h 35 min
55 min
SD
HA/HG/HX/
HE
1 h 40 min
1 h
VW-VBG260
(optional)
[7.2 V/2500 mAh]
4 h 40 min
HDD
HA/HG/HX
3 h
1 h 50 min
HE
3 h 5 min
SD
HA/HG/HX/
HE
3 h 10 min
2 h
VW-VBG6
(optional)
*
[7.2 V/5400 mAh]
9 h 25 min
HDD
HA/HG/HX/
HE
7 h 35 min
4 h 40 min
SD
HA/HG/HX/
HE
7 h 55 min
4 h 55 min
Battery capacity indication
The display changes as the battery capacity reduces.
If there is less than 3 minutes remaining, then
will become red. If the battery discharges,
then (
) will flash.
The remaining battery capacity is displayed when using the Panasonic battery that you can use for
this unit. It may take time to display the remaining battery capacity. The actual time can vary
depending on your actual use.
The maximum amount of remaining battery capacity able to be indicated is 9 hours 59 minutes. If
the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green and will not
change until the remaining time falls below 9 hours 59 minutes.
When changing modes, the time indication will turn off momentarily in order to recalculate the
remaining battery capacity time.
When using the AC adaptor or batteries made by other companies, the remaining battery capacity
will not be shown.