119
VQT1Y31
With a PC
Setup
2
Connecting to a PC
Connect this unit to the PC after the software applications are installed.
Remove the supplied CD-ROM from your PC.
USB cable (supplied)
1
Connect this unit to the AC
adaptor.
It is possible to use the unit connected to the
PC with the batteries only, but you will not be
able to write data into the unit.
2
Turn on the unit.
This function is available in all modes.
3
Connect this unit to a PC.
The USB function selection screen will appear.
Insert the USB connectors as far as they will go.
Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
4
Touch [PC].
This unit is automatically recognized as an
external drive of the PC. (
F
121)
When the unit is connected to a PC, its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or card
access icon (
) appears on the unit screen.
Do not disconnect the USB cable or the AC
adaptor while the HDD access lamp is on or
HDD access icon (
) appears on the unit
screen.
