47
VQT1Y31
This allows recording of the pictures and sound
to start approximately 3 seconds before the
recording start/stop button is pressed.
1
Press the PRE-REC button.
appears on the screen.
Aim this unit at the subject and position it
securely.
2
Press the recording start/stop
button to start recording.
There is no beep sound.
After recording starts, the PRE-REC setting is
canceled.
PRE-REC is canceled in the following cases.
If you change the mode.
If you open the SD card cover when the
[MEDIA SELECT] is set to [SD CARD] in
Recording mode.
If you press the MENU button.
If you turn the unit off.
When the remaining time left for recording
motion pictures is less than 1 minute, PRE-
REC cannot be set.
If you start recording less than 3 seconds after
pressing the PRE-REC button, or while the
PRE-REC indication flashes within about
3 seconds after initiating the Quick Start
operation, motion pictures taken 3 seconds
before pressing the recording start/stop button
cannot be recorded.
When the recording start/stop button is
pressed, image shake and operation sound
may be recorded.
Images displayed on the thumbnail in Playback
Mode will differ from the motion pictures
displayed at the start of playback.
Message is displayed when this unit is moved
rapidly.
Select the menu. (
F
28)
This function’s default setting is [ON].
When “CAMERA PANNING IS TOO FAST.”
appears, move the unit slowly while recording.
Set to [OFF] to turn off the message
indication.
Message will not appear while pausing the
recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set
to [ON])
In some recording conditions, messages may
not appear.
PRE-REC
This prevents you from missing a
shot.
PRE-REC
PRE-REC
Shooting guide
[RECORD SETUP]
[SHOOTING GUIDE]
[ON]
