16
VQT1A15
Before using
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad
position.
1
Flip the belt.
2
Adjust the length.
3
Replace the belt.
Rotate the lens hood
counter-clockwise
A
to remove it. In
order to attach it, place into slot
B
,
and then rotate it clockwise
C
.
≥
Attach the MC protector or the ND filter of the
Filter Kit (VW-LF43NE; optional) in front of the
lens hood. Do not attach the other accessories
on the hood. (Except for the lens cap)
(Refer to the operating instructions for the Filter
Kit.)
(Be careful about the following)
When 2 lens accessories, such as the ND filter,
are attached and the W/T lever is pressed toward
the W side, the 4 corners of an image will be
darkened. (Vignetting)
Attach the lens cap to protect the surface of the
lens.
≥
When the MC protector or the ND filter of the
Filter Kit (VW-LF43NE; optional) is attached to
the front of the lens hood, use the lens cap
included in the Filter Kit.
1
Pass the end of the lens cap cord
through the belt.
2
Pass the lens cap through the
loop.
3
To attach or remove the lens cap,
hold both sides of the lens cap
with the tips of your finger and
thumb.
Using grip belt
Lens hood
2
3
1
A
C
B
Attaching the lens cap
(Included in the Filter Kit
(VW-LF43NE; optional))
VQT1A15ENG.book 16 ページ ２００７年１月２９日 月曜日 午後８時２４分
