57
VQT4C31
This is for reducing the wind noise coming into the built-in microphones.
≥
Switch to Manual Mode. (
l
59)
≥
This function’s default setting is [OFF].
≥
When switching to Intelligent Auto Mode, [WIND CUT] is set to [OFF], and the setting
cannot be changed.
≥
You may not see the full effect depending on the recording conditions.
When recording, the input level from the built-in microphones can be adjusted.
≥
Switch to Manual Mode. (
l
59)
1
Select the menu.
2
(When [SET
r
]/[SET] is selected)
Press
2
/
1
to adjust.
≥
Adjust the microphone input level so that the
last 2 bars of the gain value are not red.
(Otherwise, the sound is distorted.) Select a
lower setting for microphone input level.
3
Press the ENTER button to determine
the microphone input level and then
press the MENU button.
≥
(Microphone input level meter)
appears on the screen.
≥
In Intelligent Auto Mode this setting is set to [AUTO] and cannot be changed.
≥
The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
≥
You cannot record with the audio completely muted.
[WIND CUT]
: [RECORD SETUP]
#
[WIND CUT]
#
[ON]
[MIC LEVEL]
: [RECORD SETUP]
#
[MIC LEVEL]
#
desired setting
[AUTO]:
AGC is activated, and the recording level is adjusted
automatically.
[SET
r
]:
The desired recording level can be set.
AGC is activated, reducing noise.
[SET]:
The desired recording level can be set.
You will be able to record natural-sounding audio.
A
Left
B
Right
C
Microphone input level
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 57 ページ 2012年1月13日 金曜日 午後8時2分