13
VQT4C31
∫
Inserting the battery
Install the battery by inserting it in the
direction shown in the figure.
≥
Insert the battery until it clicks and locks.
∫
Charging the battery
The battery cannot be charged when the
power is on. Press the power button to turn
off the power.
A
USB terminal
B
To the AC outlet
1
Open the LCD monitor.
2
Connect the USB cable to the AC
adaptor.
≥
Check that the plug portion of the AC
adaptor is not loose or misaligned.
3
Plug the AC adaptor into the AC outlet.
4
Connect the USB cable to the unit.
≥
The status indicator
C
will flash red for
approx. a 2 second time period (off for approx.
1 second, on for approx. 1 second), indicating
that charging has begun.
It will turn off when the charging is
completed.
∫
Inserting/removing an SD card
≥
Check that the access lamp has gone off.
1)
Open the LCD monitor.
2)
Open the SD card cover and insert
(remove) the SD card into (from) the
card slot
B
.
≥
Face the label side
C
in the direction
shown in the illustration and press it
straight in as far as it will go.
≥
Press the center of the SD card and then
pull it straight out.
3)
Securely close the SD card cover.
≥
Securely close it until it clicks.
Quick Guide
Access lamp [ACCESS]
A
≥
When this unit is accessing the SD
card or built-in memory, the access
lamp lights up.
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 13 ページ ２０１２年１月１３日 金曜日 午後８時２分
