43
VQT4C31
When about 30 minutes have passed without any operation while connecting AC adaptor
with this unit, this unit automatically turns off.
≥
This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in
following cases:
j
Using the USB cable for PC etc.
j
PRE-REC is used
j
During playback of the slide show
This unit is put into recording pause approx. 0.8 seconds after the LCD monitor is reopened.
≥
When in Quick Start Standby Mode about 60% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick Start will not work if there is no SD card inserted.
≥
/
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥
The LCD monitor cannot be closed when using the USB cable, so please disconnect it
from the unit.
≥
Change the mode to
.
1
Set [QUICK START] to [ON].
2
Close the LCD monitor.
The status indicator
A
flashes green and the unit
goes into Quick Start Standby Mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is put
into recording pause.
≥
Quick Start Standby Mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
≥
It may take some time for Automatic White Balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes approx. 1
k
.
≥
When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (
l
42)/[ECONOMY (AC)], close the LCD monitor once and open it again.
≥
Turn the unit off using the power button.
[ECONOMY (AC)]
[ON]/[OFF]
[QUICK START]
[ON]/[OFF]
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 43 ページ ２０１２年１月１３日 金曜日 午後８時２分
