Panasonic HC-V10 Owner'S Manual Download

Page: 88 / 124

VQT4C31

≥

Connect this unit to the PC after the software applications are installed.

≥

Remove the supplied CD-ROM from your PC.

USB cable (supplied)

≥

Insert the plugs as far as they will go.

≥

When the USB cable is connected to other equipment, the AC adaptor cannot be
used. Please ensure that the battery is sufficiently charged.

Turn on the unit.

≥

This function is available in all modes.

Connect this unit to a PC.

≥

The USB function selection screen will appear.

Select [PC] using the cursor button on the unit and press the ENTER
button.

≥

The Smart wizard screen is automatically displayed when HD Writer HE 1.0 is installed.

≥

This unit is automatically recognized as an external drive of the PC. (

90)

≥

When you select an option other than [PC], reconnect the USB cable.

≥

The LCD monitor turns off after about 5 seconds. Press the cursor button to turn the LCD
monitor on.

≥

Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)

≥

When this unit is connected to a PC using a USB cable while the unit is turned on, power is
also supplied from the PC to this unit.

≥

When the unit is connected to a PC, it cannot be turned off.
Disconnect the USB cable, before turning this unit off.

≥

When performing reading/writing between a PC and an SD card, be aware that some SD
card slots built into PCs and some SD card readers are not compatible with the SDHC
Memory Card or SDXC Memory Card.

≥

When using an SDXC Memory Card, check the following support site.

http://panasonic.net/avc/sdcard/information/SDXC.html

With a PC

Connecting to a PC



HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 88 ページ２０１２年１月１３日　金曜日　午後８時２分

Summary of Contents for HC-V10





























































































































Search results

Summary of Contents for HC-V10

Reviews:

Related manuals for HC-V10

Brands by name

Popular brands

Panasonic HC-V10, Owner'S Manual

Search results

Summary of Contents for HC-V10

Reviews:

Related manuals for HC-V10

Brands by name

Popular brands