![background image](http://html.mh-extra.com/html/panasonic/fx-55-series/fx-55-series_operating-instructions-manual_270583049.webp)
1.
Right-click
or
on the task tray, and click [Power Options].
2.
Click [Choose what the power buttons do] - [Change settings that are currently unavailable].
3.
Add check mark for [Hibernate] and click [Save changes].
I M P O R TA N T
While the computer is entering sleep or hibernation
n
Do not:
Touch the keyboard, touchpad, touchscreen (only for model with touchscreen), or power switch.
Use an external mouse or other peripheral devices.
Connect or disconnect the AC adaptor.
Close or open the display.
Insert and remove the microSD Memory Card.
Wait until the power indicator blinks green (sleep) or goes off (hibernation).
n
It may take 1 or 2 minutes to enter sleep or hibernation. Do not touch any key though the screen becomes dark.
n
After releasing the power switch, do not operate it until the power indicator blinks or goes off.
If you press and hold the power switch for longer than 4 seconds, the computer will forcibly shut down.
Unsaved data will be lost regardless of which option is selected under the “Control Panel” - [Hardware and Sound] - [Power Options] - [Choose
what the power buttons do] - “When I press the power button”.
In sleep or hibernation
n
Do not attach or remove peripheral devices. Doing so may cause malfunction.
n
Power is consumed in sleep.
When power is exhausted, the data retained in memory will be lost. Connect the AC adaptor when the computer is in the sleep function for a pro-
longed time.
To resume from sleep or hibernation
1.
Open the display, press the power switch (A) or touch the keyboard, touchpad or fingerprint reader to resume.
I M P O R TA N T
n
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately 15 seconds (nor-
mally) or 60 seconds (when the computer is on a network).
Touch the keyboard, touchpad, touchscreen (only for model with touchscreen), or power switch.
Use an external mouse or other peripheral devices.
Connect or disconnect the AC adaptor.
Close or open the display.
Shut down or restart Windows.