![background image](http://html.mh-extra.com/html/panasonic/fx-55-series/fx-55-series_operating-instructions-manual_270583154.webp)
Erasing Flash Memory Data
When disposing the computer or transferring the ownership, erase all flash memory drive data in order to avoid data leakage. Even if you erase the data
or initialize the flash memory drive using normal Windows commands, the data can be read with some special software. Use the flash memory drive data
erase function to erase the data completely.
Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software's license agreement.
Erasing Flash Memory Data
The flash memory drive data erase function erases data using an overwriting method, but there is a possibility that due to malfunctions or other oper-
ational errors, data may not be completely erased. There are also specialized devices that may be able to read data that has been erased using this
method. If you need to erase highly confidential data, we recommend that you contact a company that specializes in this process. Panasonic Cor-
poration will bear no responsibility for losses or damages suffered as a result of the use of this function.
I M P O R TA N T
n
Connect the AC adaptor and do not remove it until flash memory data erase is complete.
N O T E
n
<Only for model with optical disc drive>
Even if flash memory drive data erase is performed, the number of times of DVD’s region code setting will not be reset.
n
This function cannot be used to erase the data on the specified partition. However, the entire flash memory drive data including the
data of the partition with recovery tools will be erased.
n
The erasing disk menu is not displayed when using the recovery partition.
Using Recovery Disc
Preparation
Prepare the following items:
<Only for model without optical disc drive> Commercially available optical drive
Recovery Disc (
)
Remove all peripherals. (except for the commercially available optical drive)
Connect the AC adaptor and do not remove it until flash memory drive data erase is complete.
1.
Start the Setup Utility.
1.
Click
(Start) -
(Settings) - [Update & Security] - [Recovery].
2.
Click [Restart now] under “Advanced startup”.
3.
Click [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
2.
Write down all of the contents of the Setup Utility and press
≪
F9
≫
.
At the confirmation message, select [Yes] and press
≪
Enter
≫
.
3.
Insert the media that was used to create the recovery disc.
For DVD/BD media
1.
Connect the commercially available optical drive to the USB Port (only for model without optical disc drive).
2.
Set a disc into the optical disc drive or the commercially available optical drive.
For USB storage devices
1.
Connect the USB storage device used to create the recovery disc to the USB port.
4.
Press
≪
F10
≫
.
At the confirmation message, select [Yes] and press
≪
Enter
≫
.
The computer will restart.