Note that the described FPS values are theoretical. They may be decreased depending on the actual use conditions.
I.
Burst Mode
Press and hold the photo shooting button to shoot continuously while the button is pressed. The maximum number of continuous shoot-
ing is 20.
You cannot shoot continuously when using the Night Mode.
J.
Adding a stamp
Add geolocation and time stamps to still images.
K.
Adding a geotag
Add geotagging to the Exif data of still images.
L.
Photo storage folder
Specify the destination of recorded photo data to save. The default value is the “Pictures” folder.
M.
Video storage folder
Specify the destination of recorded video data to save. The default value is the “Videos” folder.
If you specify the FAT32 formatted storage as destination to save, video files cannot be correctly created when the storage data
capacity exceeds 4 GB.
N.
Self-Timer
Specify the time period until shooting starts after the button is pressed. (OFF/5 sec./10 sec.)
O.
Interval Shooting
When you move the slider to the right, and specify the value except [0], the camera automatically repeats shooting at intervals of spe-
cified seconds. The maximum 10 photos can be shot continuously.
P.
Restore default settings
Return all the settings to the default values.
To close the [Setting] menu, click
on the upper left of the screen, or click the preview screen.
N O T E
n
To specify the save destination folder, select the folder you have the access right to. If a writing error occurs, change the specified
folder.
n
The drive that appears by performing the following procedure will be used as the location in which the “Pictures” and “Videos” folders
will be stored.
Click
(Start) -
(Settings) - [System] - [Storage], and then click [Change where new content is saved] under “More storage settings”.
