Gettin
g started
SQT1109
6
Main unit
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
• The USB port on the front side does not support
USB HDDs. Connect a USB HDD to the USB port on the
rear side. (
>
64, Connecting the USB HDD)
Front
Pull to flip down
the front panel.
1
Disc tray
2
Display (
>
7)
3
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
4
SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
5
Open/close disc tray
6
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
7
USB port (
DC 5 V 500 mA)
Inserting or removing media
∫
Disc
∫
SD Card/USB device
Disc
DMRBWT760GN_eng.book 6 ページ ２０１６年４月１１日 月曜日 午後３時３２分
