77
RQT8853
Ref
erence
Troubleshooting Guide
Use the following connection to suit the antenna lead to the unit’s RF IN terminal, and the 75
coaxial cable to the
antenna terminals on your TV or other e
q
uipment. Refer to the other e
q
uipment’s operating instructions for more
information.
If you connected this unit and a TV without an audio/
v
ideo cable, interference (lines or patterning) or a
v
ery poor
picture may appear on the TV. If this happens, follow the steps below to change the
v
ideo playback channel (RF
output channel) to remo
v
e the interference.
Type
This unit
Other e
q
uipment (tele
v
ision etc.)
A twin
lead
75−300
transformer
75
coaxial
cable
VHF or UHF
Tele
v
ision
from the antenna
(Flat) Twin lead
300
cable
300−75
transformer
To this unit’s RF
IN terminal
TRACKING/V-LOCK
CH
to select “CH 3” or “CH 4”.
The unit’s display
Each time you press the button:
CH 3 (Default setting)
CH 4
OFF
For connections with the audio/
v
ideo cable, set the RF
output channel to “OFF”.
ENTER
to fi nish.
RF Output Channel
Press the channel up/down buttons
to select a RF Output Channel.
Ch. 3
ENTER
Press and hold
for more than
5 seconds.
–
The RF output
channel number
displays on the
unit’s display.
Notes
When you set the RF output channel to “CH 3” or “CH 4”
Video from this unit can be
v
iewed on channels 3 and 4 on the TV.
Press [VCR/TV] to switch to VCR mode and output
v
ideo from this
unit (
¼
6).
If the Antenna Connector Doesn’t Match
Changing RF Output Channel
M5821.indb 77
M5821.indb 77
2007/02/26 16:38:36
2007/02/26 16:38:36
